The use method of powder molding machine
Author：adminDate：2018-03-23Views：2234
Usage method
The choice of smooth surface, stable machine, can be opened to make the machine chassis foot panel for easy observation.
He will hold the head of the induction plug into the socket and tightened on the panel. Pay attention to the location gap.
One end of the power line 3 will plug into the socket on the rear panel of the chassis, the other end is inserted into the power supply socket, please use the single-phase three wire power.
The "open the power switch on the rear panel of the chassis (POWERSW.)", "according to the panel power switch (SWITCHING)" button, "(WARMUP) to prepare" the green light, the machine can work.
The press set button (SETTINGBUTTON) "button is set to the appropriate value, generally between 0.5-2.0 seconds.
The induction head cover in the container, click on the handle of the start button, then the "heating (HEATING)" red light, said it is heated, remove the sensor head don't, "heating (HEATING)" red light is off after removing the inductive head, such as "ready (WARMUP)" green lights light machine or buzzer sound short "beep" prompt and can work under a sealed container.
But check the sealing quality, according to different materials, the diameter of the container and the production efficiency, the appropriate dressing "set button (SETTINGBUTTON) key, the best sealing quality.
